Pulleys


CMI 2 1/4 Inch Pulley
Unique design keeps weight to a minimum and gives you a larger diameter sheave while keeping the pulley very compact. Aluminum sideplates pivot and accept up to 5/8 inch rope. Sealed needle bearing model has aluminum sheave only. Strength is listed after description.

RP101 - Aluminum sides, celcon sheave and bushing 3500 lb $28.35
RP102 - Aluminum sides, aluminum sheave and bushing 5000 lb $43.00
RP103 - Aluminum sides, aluminum sheave and sealed needle bearing 5000 lb $59.00
RP104 - Stainless steel sides, aluminum sheave and sealed needle bearing 10,000 lb $68.50

All CMI Pulleys are designed to achieve maximums. Maximum strength, capacity, service life, and versatility. All pulleys feature 5/8 inch rope capability, large two-crabiner rigging points and wide, skirted side plates. Bearing models utilize a permanently lubricated, sealed needle bearing while bushing models feature a permanently lubricated, sintered bronze bushing. Side plates on the standard duty models are anodized aircraft alloy aluminum while the maximum duty models use stainless steel sideplates. All axles are hardened and ground for maximum durability.


Hi-Roller Pulley
RP105 3 inch Pulley with sintered bronze bushing $66.00
RP106 3 inch Pulley with sealed needle bearing $89.25
RP107 4 inch Pulley with sintered bronze bushing $72.20
RP108 4 inch Pulley with sealed needle bearing $95.25


CMI prussik pulley has triangular shaped sideplates to allow prussik knots to be used as a ratcheting device when hauling loads. It can be used with the knot on either side of the pulley. The sheave is made of high quality aluminum. Aluminum sideplates make for a lightweight, versatile pulley. Comes in either bushing or bearing style Prussik Minding Pulley with bushing  
RP121 PRUSSIK MINDING PULLEY WITH BUSHING $49.00
RP121A PRUSSIK MINDING PULLEY WITH Bearing $69.50


B&B 2 Inch Pulley
Large hole at top will pass two carabiners. Sheaves are made of light weight aluminum. Sideplates are available in aluminum, with a 3/8 inch aircraft bolt axle system or in stainless steel with an axle machined from stainless steel. Sideplates pivot and accept up to 1/2 inch rope. Available with sheave on a bushing or with bearings.

BP0005 B&B 2 Inch Aluminum Pulley w/ bushing - red $20.25
BP0006
B&B 2 Inch Aluminum Pulley w/ bearing - blue $23.00
BP0011
B&B 2 Inch Stainless Steel Pulley w/ bearing $31.60

B&B 3 1/2 Inch Pulley
Our 3 1/2 inch pulleys come with high quality aluminum sheaves or with corrosion resistant stainless steel. Both have machined stainless steel axles and large triangular openings that can accept two carabiners. Available with bushing or bearings. Takes up to 5/8 inch rope.
BP0017 B&B 3 1/2 Inch Stainless Steel Dbl Pulley w/ bushing $95.25
BP0018
B&B 3 1/2 Inch Stainless Steel Dbl Pulley w/ bearing $111.50


Russ Anderson Pulleys
These pulleys were designed for rescue operations by Russ Anderson. The sideplates are made of stainless steel. They rotate freely allowing the pulley to be installed on the rope at any point. The 2 inch pulleys each have a 3/4 inch diameter carabiner hole. The carabiner holes on the 3 inch and 4 inch models are enlarged to accept two 1/2 inch diameter carabiners. Both double pulleys have one Becket with a 3/4 inch diameter hole for ease in rigging block and tackle systems. Available with oilite bronze bushing or with sealed ball bearing.

150000 2 inch by 1/2 inch Single Oilite Bronze 6000lb $42.65
150500
2 inch by 1/2 inch Single Ball Bearing 6000lb $60.00
151000
3 inch by 5/8 inch Single Oilite Bronze 6000lb $75.00
152000
4 inch by 5/8 inch Single Oilite Bronze 9000lb $85.30
152500
4 inch by 5/8 inch Single Ball Bearing 9000lb $110.00
155000
2 inch by 1/2 inch Double Oilite Bronze 9000lb $72.00
157000
4 inch by 5/8 inch Double Ball Bearing 9000lb $173.00


B&B Trolleys
Designed for highlines or tyroleans, our trolleys are made from 3/16 inch aluminum stock and have aluminum pulley sheaves with stainlesss steel axles. Two oblong rigging holes allow 2 carabiners to be used. Test strength 6,000 lbs. For 1/2 inch rope.

BT0021 Single w/ bushing (red) for 1/2 inch rope $95.90
BT0022
Single w/ bearing (blue) for 1/2 inch rope $107.00
BT0023
Double w/ bushing (red) for 1/2 inch rope $142.55
BT0024
Double w/ bearing (blue) for 1/2 inch rope $173.60
BT0030
Single w/ bearing (blue) for 5/8 inch rope $118.00


Anchor Plate
Designed for rescue use with a test strength of 10,000 lbs. Makes complex rigging easier, prevents jamming together of carabiners and makes visual inspection more precise.
Weighs only 6 oz. and comes in blue anodized aluminum $31.00

Petzl Swivel


Prevents the rope from twisting when the load is turning. Excellent performance and reliability due to maintenance free sealed ball bearings.

Specifications:

Swivel-Small (P58 S)
Designed for one person loads
Compact
Breaking Strength: 23kn
Weight: 95 g
Certification:  CE
Color:  Black & Black  ------  $69.95

Swivel-Large (P58 L)
Designed for two person loads, up to three connectors can be attached to the ends.
Breaking Strength:  36kn
Weight: 150 g
Certification: CE, NFPA 1983 G
Color:  Black & Red ------  $79.95