Harnesses

Karst Works Expedition Harness
The Expedition Harness has adjustable leg loops. An adjustable strap adapter (buckle) on each leg allows for adjustment to match variations in thigh circumference due to multiple users or varying clothing requirements. These buckles are prethreaded and require minimal effort to adjust. The Expedition Harness also will accept an optional leg loop retainer strap which fits on the back of the harness. This strap, which is adjustable, supplies additional support for long rappels and helps prevent movement of the leg loops if the harness must be work for extended periods. A loop provided at the rear of the waistband can be usd to attach a Ropewalker shoulder Gibbs or as a belay point. The harness contains two equipmnet loops on the left side. Size: Will fit leg circumference up to 30 inches and a waist of 26 inches to 46 inches. $69.95


Karst Works Chest Harness
Chest Box Harness
This harness is designed to accept the placement of commercial chest boxes and Simmons Rollers on long or short bars (will not work with single Simmons Rollers.) The chest strap is a continuous loop of 1 3/4 inch Mil-Spec webbing and will fit almost any size chest. It is adjusted by a simple forward pull on the free end against the buckle, which rides near the right armpit. Shoulder straps of 1 inch tubular webbing adjust via a quick adjust buckle with an upward pull; both straps are sef-equalizing. A sewn in ring is provided at the front to attach a bungy cord from a knee ascender. Fits up to 48 inch chests $39.50


Karst Works Climbing Harnesses

Gibbs Foot Harness

A sewn-in foot Gibbs harness eliminates the problems with attachment and loosening during a climb and provides a comfortable, quick donning, and strong alternative to a tied foot Gibbs system. Mil-Spec 1 3/4 inch wide parachute webbing is used for the foot loop, to which a free-running Gibbs Ascender is attached with 3/4 inch tubular webbing. A piece of 5/8 inch webbing of a contrasting color is inserted inside the 3/4" webbing before sewing; this increases the strength of the attachment while providing a visible wear indicator. A pre-sewn "chicken" loop with quick fit adapter holds the Gibbs and footloop securely in place at the instep. The chicken loop will rotate to permit use on either foot. Both buckles easily adjust to fit over any size caving boot (5 to 14). The Gibbs Foot Harness may also be purchased with only the cam for those who already own one or more Gibbs ascenders. This provides a more economical alternative by avoiding having to purchase another ascender. $88.95


Foot Loop with Chicken Loop
The Footloop is designed for use with the Mitchell, Frog, Texas, a standard knee harness or any other ascending system utilizing the feet. To provide superior abrasion resistance, long wear, and superior comfort, these loops are constructed of a doubled layer of 1 3/4 inch Mil Spec webbing sewn together throughout their length. A 2 inch gab of single layer webbing is provided at the top for attachment of a sling. A sewn-in "chicken" loop of 1 inch tubular webbing cinches easily around the ankle via a quick fit adapter to hold the loop on securely, even in a full heel-hang.  Four Sizes available; Small, with an Inside Circumference (IC) of 13 1/2 inches fits boot sizes 5-7; Medium IC 14 1/2 inches boot sizes 7-9; Large IC 16 1/2 inches, boot sizes 9-11; Extra Large IC 18 1/2 inches, boot sizes 11-13 $14.95

Gibbs Shoulder Harness
As an added safety margin, a third point of attachment should be used/available in a Ropewalker system and is required to maintain an upright position when a chest box is not used. The Gibbs Shoulder Harness provides such a safety. A length of 1 3/4 inch Mil-Spec webbing, attached to a free-running Gibbs, passes over the shoulder and is attached to the back of the seat harness (It is recommended that a short length of 7/16 inch static rope also be tied from the Gibbs to the main seat attachment point for safety.) The back strap is adjustable via a quick fit adapter; by reaching behind and pulling the free end, the harness tightens for climbing; for non-vertical drops, the harness can be removed from the shoulder, but should remain attached as a safety. One size. $86.50

Gibbs Knee Harness
The Gibbs Knee Harness is a 1 inch tubular webbing harness sewn to ride at or just above the knee. The harness is designed to fit any size Karst Works, Inc. Footloop (not included). The knee harness includes an additional length of webbing which attaches to the seat or harness as an upset protector should a chest harness or upper ascender fail. A bungy cord should be connected to the Gibbs ascender and attached to the chest harness or over the should to the seat harness to pull the ascender up. Two sizes; medium for person up to 5'9" and large for those taller than 5' 9" $78.50

Standard Knee Harness without Ascender
The Standard Knee Harness is a 1 inch tubular webbing harness sewn to ride at or just above the knee. The harness is designed to fit any size Karst Works, Inc. Footloop (not included). The knee harness includes an additional length of webbing which attaches to the seat or harness as an upset protector should a chest harness or upper ascender fail. The Standard Knee Harness has a loop sewn in the harness for attachment of an ascender. The Standard Knee Harness will accept a quick link for attachment into a CMI or Petzl ascender. The harness has been shortened to account for the extra length of the Quick Link. A bungee cord should be over the shoulder to the seat harness to pull the ascender up. Two sizes; medium for person up to 5'9" and large for those taller than 5' 9" $18.50

Simmons Roller Harness
This harness includes a permanenetly attached Simmons Field-Model Chest Roller. The roller is attached to the 1 3/4 inch Mil-Spec webbign with 1 inch tublular webbing;inside this webbing is a piece of 3/4 inch webbing of a contrasting color for additional strength and as a wear indicator. The harness is adjustable with a friction buckle. The harness does not have a plate sewn inot the webbing allowing ofr a decrease in weight and bulk with a slight loss of efficiency. If a plate is needed, we recommend that a Simmons Plate Roller and Harness be purchased. Fits chest sizes 28 to 50 inches. $114.95

Blum Box
This lightweight double chest box has a cast aluminum base plate, a steeel axel and three rotating surfaces to protect the rope. Holds the rope snugly with a countersunk groove while providing plenty of room for the ascender line. Its unique single hinge design allows one handed operation on either side.
New Model $96.00